Used/Upgraded CMMs

 

Omni-Tech has been performing the engineering required to upgrade Coordinate Measuring Machines for over 25 years.  Each used CMMs Omni-Tech offers is completely remanufactured from the ground up to better than new condition. We do not sell used CMM Equipment we sell remanufactured Coordinate Measuring Machines.

Our remanufactured USED CMMs (Coordinate Measuring Machines) include:

  • New airlines, new wiring
  • Renishaw I++ UCC controllers with Joystick
  • New scales, 0.1um digital encoders
  • Air bearings are refurbished checked or replaced if required
  • Granite is repaired and machine is repainted
  • Complete system verification with in house calibration
  • Controller Desk and Computer System with 24” Monitor or Touchscreen
  • Several Software Option

Each remanufactured used CMM that Omni-Tech offers is fully tested and calibrated in house and is backed by a full warranty ensuring that the machine will exceed our customers’ expectations.

In addition we are able to supply remanufactured used CMM equipment with the latest PH20, REVO 5-axis probe systems and the full line of Perceptron CMM laser scanners. These types of probing equipment and laser scanners installed on existing equipment is a very effective and economical method of gaining today’s required inspection performance for CMMs in the areas of accuracy, application and cycle time out of an older stable CMM frame.

Purchasing a remanufactured used CMM from Omni-Tech will give you the peace of mind that you are purchasing a fully tested CMM that is ready to go to work the day it is installed.

NEW! 2017 Coord3 Hera 15.10.9 CMM

In Stock Ready to Ship today!

– New 2017 CMM Ready to Ship!

Measuring Range X= 1000mm Y= 1500mm Z= 850mm

 Includes:

Renishaw PH10M Probe System

Renishaw TP20 Kit with 3 Modules

Renishaw UCCT3 Plus Controller

Renishaw MCR20 Changing Rack

Dell Optiplex I7 with 24″ Flat Panel

RTI Filter System

Hardware Option:

Renishaw PH20 5-Axis probe

Software Available Options:

PolyWorks Inspector Probing ++

Nikon CMM Manager

Renishaw Modus

 

New Old Stock Nikon LK V 10.7.6 Demo CMM

2012- Demo Updated

Measuring Range X= 700mm Y= 1000mm Z= 600mm

Includes:

Renishaw UCC T3 Plus CMM Controller

Renishaw PH10M probe with TP20 Kit

MCU5 Joystick Controller

Controller Desk

Dell Precision I7 with 24″ Flat Panel

RTI Filter System

0.1 um Renishaw RG22 0.1mm  Scale System

Options Avaliable:

Renishaw PH20 5- axis touch probe

Renishaw SP25 Scanning

Software Options:

PolyWorks Inspector

Renishaw Modus

Nikon CMM-Manager

Any I++ capable software package

Mitutoyo Crysta Apex 776  $58,000.00

Serial # 60861213

Probe Head:      Renishaw PH10MQ

Probe Head Controller:     PHC10-3 Renishaw

Probing System:      TP-200 probe with SCR200 Rack

SP25 scanning probe with ACR3 Rack and FCR25 holder

Software:   MCOSMOS Version4, Revision 5    Measurelink

 

Coord3 Benchmark DCC Demo CMM

 – Used Demo

Measuring Range X= 500mm Y= 400mm Z= 440mm

Specification MPe = 3.2+L300     

Includes:

 Renishaw PH10 Probe System

Renishaw TP20 Kit with 3 Modules

Renishaw UCCT3 Plus Controller

Renishaw MCR20 Changing Rack

Controller Cabinet

Dell Optiplex I7 with 24″ Flat Panel

RTI Filter System

 

Software Available Options:

PolyWorks Inspector

Renishaw Modus

Nikon CMM-Manager Software

 

http://www.omnicmm.com/wp-content/uploads/2016/08/BENCHMARK.pdf

Mitutoyo CHN 1612-20 DCC CMM

– Upgraded CMM

Measuring Range X= 2000mm Y= 1200mm Z= 1600mm

 Includes:

Renishaw PH10M Probe System

Renishaw TP20 Kit with 3 Modules

Renishaw UCCT3 Plus Controller

Dell Optiplex I7 with 24″ Flat Panel

 

Software Available Options:

PolyWorks Inspector Probing ++

Nikon CMM Manager

Renishaw Modus

 

(2) Units Available -Mitutoyo Bright Apex 504 DCC CMM

– Upgraded CMM

Measuring Range X= 500mm Y= 400mm Z= 400mm

 Includes:

Renishaw PH10 Probe System

Renishaw TP20 Kit with 3 Modules

Renishaw UCCT3 Plus Controller

Renishaw MCR20 Changing Rack

Dell Optiplex I7 with 24″ Flat Panel

RTI Filter System

Hardware Option:

Renishaw PH20 5-Axis probe

Software Available Options:

PolyWorks Inspector Probing ++

Nikon CMM Manager

Renishaw Modus

 

Brown & Sharpe PFX 10.7.5  DCC CMM

– Upgraded CMM

Measuring Range X= 700mm Y= 1000mm Z= 500mm

 Includes:

Renishaw PH10 Probe System

Renishaw TP20 Kit with 3 Modules

Renishaw UCCT3 Plus Controller

Renishaw Tonic 0.1um Scale System

Dell Optiplex I7 with 24″ Flat Panel

 

Software Available Options:

PolyWorks Inspector Probing ++

Nikon CMM Manager

Renishaw Modus

 

Brown & Sharpe PFX 7.6.5  DCC CMM

– Upgraded CMM

Measuring Range X= 600mm Y= 700mm Z= 500mm

 Includes:

Renishaw PH10 Probe System

Renishaw TP20 Kit with 3 Modules

Renishaw UCCT3 Plus Controller

Renishaw Tonic 0.1um Scale System

Dell Optiplex I7 with 24″ Flat Panel

 

Software Available Options:

PolyWorks Inspector Probing ++

Nikon CMM Manager

Renishaw Modus